Advertisement
Safety Instructions
GB
The object of this manual is to help you use this equipment more safely and to give you information about
how maintenance is carried out. The equipment is designed for use in industrial applications by experienced
operators. Read through the instructions carefully before you try to use the equipment.
If after reading the Operator's Manual you are still unsure about the safety risks associated with use of the
machine, you should not use the equipment. Contact your dealer if you require further information.
These safety instructions only cover the basics of safe use. It would be impossible to describe all possible
risk situations that could arise when using the equipment in the safety instructions. You can, however, prevent
accidents yourself by always using common sense.
During the design and manufacture of Husqvarna products, great importance is placed on safety, as well as
effectiveness and ease of use. Certain points must be observed for the equipment to remain safe:
1. Read through and make sure that you understand the contents of these operating instructions before you use the
machines or carry out maintenance. If the operator cannot read these operating instructions, it is the responsibility of the
owner to explain them to the operator.
2. All operators shall be trained in the use of the machine. The owner is responsible for ensuring that the operators receive
training.
3. Check that the machines are in perfect working order before using them.
4. People and animals can distract you, causing you to lose control of the machines. For this reason, always remain
concentrated and focused on the task.
5. Never leave the machine unsupervised. A rotating drill bit can entail a risk of serious injury.
6. Be careful as clothing, long hair, and jewellery can get caught in moving parts.
7. Onlookers within the work area can be injured. You should never, therefore, start the machine without being certain that no
people or animals are within the work area. Secure the work area by cordoning off if necessary.
8. Wear suitable personal protective equipment, such as a helmet, protective shoes, and eye and hearing protection.
9. Working close to power lines:
When using hydraulic tools on or close to power lines, the hydraulic hoses must be marked and approved as "non-
conducting dielectric". The use of a different type of hose can result in fatal or serious personal injuries. When replacing
hoses, hoses of the "non-conducting dielectric" type must be used. The hoses must be regularly checked for their
electrical conductive insulation in accordance with special instructions.
10. Check carefully to ensure you do not drill through any embedded live cables or embedded water pipes.
11. Working close to gas conduits:
Always check and mark out where gas pipes are routed. Drilling close to gas conduits always represents a danger. Make
sure that sparks are not caused when cutting in view of the risk of explosion. Remain concentrated and focused on the
task. Carelessness can result in serious personal injury or death.
12. Never use a damaged stand.
13. Check that the wall mountings and rail are well anchored.
14. Make sure that other people are nearby when you are drilling so that you can call for help should an emergency arise.
15. Do not use the equipment if it is not working properly.
16. Do not modify safety equipment. Check regularly that they function as they should.
17. Regulations for the prevention of accidents, and other general safety and occupational health regulations, must always be
followed.
18. Make sure that you always have first aid equipment close at hand when using the equipment.
19. Make sure you keep your hands and feet away from moving parts.
20. Keep all parts in good working order and ensure that all fixtures are properly tightened.
21. Store the machines in a locked area, where they are inaccessible to children and adults who have not been trained to
operate the machines.
22. Always check the rear of the wall/floor where the drill bit will emerge. Cordon off and make sure that no one can be injured
or materials damaged.
10
Advertisement
