Advertisement
Key to symbols
GB
Read the entire Operator's
Manual before using or
servicing the machine.
Read, understand, and follow
all warnings and instructions
in these operating instructions
and on the machine.
Always wear eye protection,
hearing protection, helmet,
mask, gloves, trousers and
boots when using the machine.
A first aid box should always by
on hand.
This product conforms to the
applicable EU directives
Check that the ceiling is strong
enough. The ceiling should be
solid.
Make sure that the fork grips in
the inner pipe, tighten using 24
mm spanner.
Ø
4
Lock the nut using a 30 mm
spanner.
Check the lock nut on the L-
handle. Tighten until it becomes
difficult to turn and so that it
cannot change due to vibration
when horizontal drilling.
The drilling machine must be
suitable and designed for the size
of drill bit. Max drill bit diameter
120 mm.
Direction of rotation
The drilling machine must be
suitable and designed for the size
of drill bit.
The drilling machine must
conform to applicable
regulations, EU-requirements as
well as national requirements.
See your instruction manual for
your drilling machine.
Example of a suitable drilling
machine: Husqvarna DMS 160
Use a drill that is suitable for the
task.
Advertisement
