How to Use
-Whisk attachment- (continue)
2
When finished, release trigger
switch and lock child lock.
Confirm that rotation has stopped,
and then remove whisk from
bowl.
After Use
Unplug the power plug.
●
Remove whisk attachment and clean it. (P. EN18-20)
●
Cleaning & Care
Notes for Cleaning
Be careful not to directly touch blades with your hands.
●
D o not use benzine thinner, bleach, nylon face of sponge, metal brush,
●
polishing powder, etc. (Otherwise, the parts surface will be damaged.)
Do not use chlorine type detergents. (Cause of rust and breakdown.)
●
B e sure to dry well after washing. (Risk of rust)
●
Dry blender blades with blades pointing downwards.
Do not clean the machine and attachments with a metal pointed object.
●
Notes for Storage
K eep the machine out of
●
reach of children.
(Avoid personal injury.)
A ttach protective holder to
●
the blender.
EN18
Lock child
lock
Unplug before cleaning.
●
Clean the machine after every use.
●
About Resin Parts Discolouration
Resin parts* may become discoloured through
contact by the staining compounds in carrots
and other vegetables. This discolouration cannot
be fully removed with a sponge, but it poses no
problem to use. Early cleaning after use can
reduce discolouration.
* Blender housing, beaker, chopper bowl, chopper
blade, protective holder.
Blender attachment
① Pour approx. 200-300 mL of water into the
beaker.
② Choose "High" mode.
③ Run the blender for approx.
15 seconds. (P. EN14)
Do not move up and down,
●
otherwise, water may spill.
④ Replace water and repeat
several times.
⑤ After removing leavings, wash
with the spatula brush.
Motor housing & Adapter
Wipe with a well-wrung cloth.
Water entering the inside of the machine can
cause malfunction.
Other Parts
Wash with diluted dish detergent (neutral).
Use a brush to clean chopper blade and chopper blade pin.
●
Remove trapped
ingredients with
the spatula brush.
If cannot clearly clean, try to use
a non-metallic pointed object
(made of wood is recommended).
D o not soak chopper blade in water or hot water.
●
(Water entering the inside of the machine can cause
malfunction.)
Use a soft sponge to clean lid/slip-proof mat and slip-proof ring.
●
Lid/slip-proof mat
Wash it after removing from
beaker.
Blender housing
Blender blade
Wash the
●
bottom with a
brush to avoid
touching the blender
blade directly.
Bottom
Remove ingredients trapped
●
between metal parts with the spatula
brush. If cannot clearly clean, try to use
a non-metallic pointed object (made of
wood is recommended).
(Do not touch rubber portion.)
Adapter
Motor housing
Chopper blade
Chopper blade pin
Slip-proof ring
Wash it after removing from
chopper bowl.
EN19