Key Lock Function - Sanyo MCO-18AC UV Instruction Manual

KEY LOCK FUNCTION

This incubator is provided with a key lock function. When the key lock is ON, change of temperature or
CO density setting through the key pad is not available.
2
Note: The key lock is set in OFF mode (L0) at the factory.
Display
Procedure for key lock setting (change from key lock OFF to key lock ON)
Description of operation
1
2 Press digit shift key for 5 seconds.
Press numerical value shift key
3
and scroll the figure to 1.
4 Press enter key.
Note:
●The key lock function is available for temperature and CO
● To cancel the key lock, set to L0 in the above procedure.
Mode
Key lock is OFF Enable to change of temperature and CO
Key lock is ON Disable to change of temperature or CO
Key operated
Function
Indication after operation
The current chamber temperature and
----
CO density are displayed.
2
L0 is displayed in the temperature
indicator.
When pressed, the figure of settable
digit changes.
The key lock is set to ON.
ENT
The current chamber temperature is displayed.
density setting.
2
23
setting
2
setting
2