Panasonic CF-VCW Series Operating Instructions Manual page 10

Troubleshooting
The computer does not recognize the
CD-R/RW Drive Pack.
The MP indicator (
Cannot play disc or read data from it.
Cannot eject disc.
E
A blue background appears on the screen
with the MPEG image.
The disc tray does not close.
The computer hangs or reboots.
10
) does not light.
Check the settings by following the instruc-
tions in "Software Preparation".
Is the CD-R/RW Drive Pack properly
mounted in the multimedia pocket?
Is the disc loaded on the tray correctly?
Is the disc bent, scratched, or dirty?
Is the computer powered on?
To remove a disc when the computer is pow-
ered off, insert a sharp object such as the bent-
out tip of a paper clip into the emergency hole.
Pushing it completely to the end will free the
tray so that it can be pulled out.
Emergency Hole
Did you open the CD-R/RW drive or remove
the MPEG disc while it was operating?
Re-insert the MPEG disc and close the CD-R/
RW drive. Press Enter .
Did you touch the eject button when you close
the tray?
Is an external CD-ROM drive or DVD-
ROM drive connected?
When the CD-R/RW Drive Pack is in-
stalled, do not use an external CD-ROM
drive or DVD-ROM drive.
Was the computer turned off before the in-
stallation/removal of the CD-R/RW Drive
Pack?
The computer needs to be off so that the
CD-R/RW Drive Pack can properly initial-
ize during Windows startup.