Design-in Guide - Philips Xitanium LED Xtreme SR driver
End of Life (EOL)
Factory default setting: disabled
EOL is providing a visual notification to a customer that the LED
module has reached the end of manufacturer- specified life and
that replacement is recommended.
Once active, an indication is given at each power-up of the driver,
after which the LEDs will flash for 2.5 seconds before normal
operation is continued.
Enable
Adjustable Start-up Time (AST)
AST enables gradual increase of light level at power-up of the driver,
ensuring a smooth and comfortable transition from daytime
to evening illumination. AST
value between 0s and 30s, in increments of 1ms.
Note: this feature does not in any way influence the driver inrush
current at mains turn-on.
Light Source Operating Hours (LSO)
Light Source Operating: set a specific time or reset the operating
hours, e.g. after replacing a LED module or driver with another
(new) one. When CLO is enabled it is recommended to set
the correct light source age.
50,000 h
can
be
programmed
to
0
ms
h
0
a
32