Advertisement
Edit Controller
The Edit Irrigation Controller screen allows the
operator to edit a variety of controller settings:
Name: Edit controller name
Description: Edit controller description
Smart Connect ID: Replace the Smart Connect
device with a new one.
PIN: Change the PIN to ensure secure
communication between the controller and operator.
See Controller PIN Setup on page 12.
Schedules: Adjust number of schedules to run
(up to 3).
Auxiliary: Checking this box enables the auxiliary
schedule on the controller.
Number of Zones: Change number of zones on
controller (up to 12).
Default Test All Runtime: Change default runtime
when Test All Zones command is executed.
Default Manual Runtime: Change default runtime
of manual zone operation.
Replace Controller: Click this button to inform the
gateway that you have replaced the controller's
hardware.
Delete (controller): Delete the controller from the
location.
Controller Preferences: Adjust controller
preferences such as language, time format, date
format, and more.
10
Controller Information: Review and adjust the
controller's sensor information, such as rain or soil
sensor information and settings.
Advanced
• Get Controller Configuration: Retrieve the
latest configuration settings from the controller.
Click this link to ensure the latest controller
configuration settings have been synchronized
with the SMRT
server.
SCAPE
• Synchronize Communication Card:
Synchronize the communication card settings
with the gateway. Useful for re-establishing
communication between the controller and the
SMRT
server.
SCAPE
• Import Controller Configuration: Load a
previously saved Controller Configuration from
disk.
• Export Controller Configuration: Save current
Controller Configuration to disk for future use.
Remember to press Save when done.
Advertisement
