Communication With Devices - Siemens FXS2061-O User Manual

2.5 Communication with devices

Building Technologies
Fire System
The radio gateway has radio contact with all devices in its radio cell and saves
device data.
The device data can be called by the radio gateway.
The device data saved in the radio gateway is updated automatically.
To save resources, automatic updating does not take place often. The data is
automatically saved for the first time four hours after commissioning is completed.
The interval for updating device data can be set and initiated from within the
'FXS2061-O Wireless Diagnostic Tool' software. Updating can take up to two hours
depending on the complexity of the radio cell.
Establishing a connection between the device and the PC
To communicate with the radio gateway and the devices, you need a MCL-USB
adapter (radio), e.g., FDUZ227, which is available separately.
The 'FXS2061-O Wireless Diagnostic Tool' software communicates directly with
the devices (variant A)
radio gateway via cable (variant B)
indirect connection to the other devices.
Data transfer via cable is faster than radio transfer.
Figure 1: Overview of connections
Communication with devices
by radio via the 'MCL-USB adapter (radio)', or with the
. With a cable connection, there is an
Installation
2
15 | 64
A6V10425605_b_en_--
2016-12-12