Siemens FXS2061-O User Manual page 21

Main menu
Submenu
Discover Gateways ...
Network
Get gateway device list
or <Ctrl> + <L>
Get connectivity state
Get neighbourhood table
Get battery level
Live data from device
Trigger data collection
or <Ctrl> + <Shift> + <L>
Start gateway trace logging Starts the log file with all information from:
Stop gateway trace logging Stops the log file with all information from:
Remove device from radio
cell
Radio cell in OPERATION
mode
Radio cell in
MAINTENANCE mode
Building Technologies
Fire System
Action
Searches for the radio gateway connected by cable or the active
radio gateways within range.
Loads the devices for the radio gateway.
Checks the radio cell connections.
Displays the attenuation values for the neighboring devices in
the radio cell.
Displays the battery charge state in 5 levels.
The selected data for the device is updated. All data that is not
selected is retained.
Get all live data
Get connectivity state
Get neighbourhood table
Get battery level
Starts the data collection from all devices in the radio cell and
saves this on the radio gateway.
Radio gateway
Radio cell
Devices
Radio gateway
Radio cell
Devices
Removes the selected device.
Normal operation
The radio cell is ready for use.
Information is transmitted to the detector line via the radio
gateway.
Maintenance mode
The radio cell can be modified.
The radio cell remains capable of emitting an alarm.
GUI
3
Menu bar
21 | 64
A6V10425605_b_en_--
2016-12-12