Cc-Link Communication Specifications; Peripheral Devices - Mitsubishi Electric EcoMonitorPro EMU2-RD3-F Instruction Manual

Energy measuring unit
Table of Contents

Advertisement

12.2 CC-Link communication specifications

Item
Number of occupied stations
Maximum number of
connected units
Transmission rate
(B RATE)
Station number
(STATION)
CC-Link version
Connecting cables
13.

Peripheral Devices

The following products are available.
Product name
Current sensor
EMU-CT50
EMU-CT100
EMU-CT250
EMU-CT400
EMU-CT600
EMU2-CT5
EMU2-CT5-4W
Current sensor cable
EMU2-CB1-DR
EMU2-CB1-DR-4W
EMU2-CB-T1M
EMU2-CB-T5M
EMU2-CB-T10M
EMU2-CB-T20M
EMU2-CB-T1MS
EMU2-CB-T5MS
EMU2-CB-T10MS
Display unit
EMU2-D65
EMU2-D65-M
Remote device station occupying one station
The following conditions must be met.
When the system consists only of this type of units, up to 42 units can be connected.
Condition 1: {(1×a) + (2×b) + (3×c) + (4×d)} ≤64
a : Number of units occupying 1 station
b : Number of units occupying 2 stations
c : Number of units occupying 3 stations
d : Number of units occupying 4 stations
Condition 2: {(16×A) + (54×B) + (88×C)1} ≤2304
A : Number of remote I/O stations
B : Number of remote device stations
C : Number of local station
Changeable to 156 K, 625 K, 2.5 M, 5 M or 10 M
(The station-to-station cable length and the maximum total cable distance vary depending on the transmission rate.)
Setting in range from 1 to 64
(Set the station number without fail.)
Ver. 1.10
For CC-Link connection, use the specified cables.
The terminal resistance varies depending on the type of the dedicated cable.
For the details of the dedicated cables and terminal resistance, see the manual supplied with the master unit.
Model
50A
100A
250A
400A
600A
5A
5A
0.5 m
0.5 m, for 3 phase 4wire
1 m
5 m
10 m
20 m
1 m
5 m
10 m
Small display unit with 1-m connecting cable
Logging display unit with 1-m connecting cable
Specification
Remarks
Split-type sensor
Split-type sensor
Split-type sensor
Split-type sensor
Split-type sensor
Split-type sensor, integrated with two 5A sensors and 0.5-m cable
Split-type sensor, integrated with three 5A sensors and 0.5-m cable, for 3
phase 4 wire
Separate type, a pair of two cables
Separate type, a pair of two cables
Separate type, a pair of two cables
(28/32)

Advertisement

Table of Contents
loading

Table of Contents