Low Heart Rate Alert; Measuring Blood Oxygen Levels (Spo ); Testing Stress Levels - Huawei TalkBand B6 Online Help Manual

HUAWEI TalkBand B6 Online Help
HUAWEI TalkBand B6 Online Help

5.4 Low heart rate alert

If you don't move or fall asleep for 30 minutes and your heart rate stays lower
than the set low heart rate for more than 10 minutes, your band will vibrate once
and display the low heart rate alert. Swipe right or press the side button to clear
the reminder.
Perform the following to set your low heart rate limit:
1.
2.
5.5 Measuring blood oxygen levels (SpO
On your band, enter the app list, touch SpO
When Retest is displayed on the screen, it indicates that the measurement is
complete.

5.6 Testing stress levels

Enable Automatic stress test: Open the Huawei Health app, go to the device
settings screen, go to Health monitoring > Automatic stress test, then enable
Automatic stress test.
Viewing stress data: On your band, enter the app list and touch Stress to view
your stress level and the percentages occupied by different stress levels.
Issue 01 (2020-07-31)
Open the Huawei Health app, go to the device settings screen, then touch
Health monitoring > Continuous heart rate monitoring, then enable
Continuous heart rate monitoring.
Touch Low heart rate alert then set your preferred low heart rate.
NO TE
● You can set the low heart rate value to 40 bpm, 45 bpm, or 50 bpm.
● This feature is only available on Android phones.
NO TE
● This function may not be supported in your country, please contract official service
center to get more details.
● The reading will be interrupted if you swipe right on the band screen, receive an
incoming call, or an alarm goes off.
● For a more accurate result, it is recommended that you wait three to five minutes after
putting your band on to measure your SpO
● Keep still and wear your band a little bit tightly during the measurement, but avoid it
from coming into contact with the joint. Ensure that the heart rate sensor is in touch
with the skin and there are no foreign objects between your skin and the band. Make
sure the band screen is facing up.
● During the measurement, the band will also measure your heart rate.
● This measurement may also be affected by some external factors such as low ambient
temperatures, arm movement, or if you have tattoos on your arm.
● The measurement results are for reference only and are not intended for medical use.
Copyright © Huawei Technologies Co., Ltd.
5 Health management
)
2
and start a SpO measurement.
2 2
.
2
31