Siemens iQ700 Installation Manual page 12

Step 2.2: Connecting the extractor hood
to your home network, step by step
Follow the instructions in Step 2.2 only if the app tells
you to. The following steps set out how to perform this
operation on the appliance itself.
Note:
To connect the extractor hood to your home
network, the hood and the light must be switched
off. You can cancel the process at any time by
pressing .
1 | Press and hold the b symbol on your extractor hood until the
and – indicators start to flash.
D
1
12 EN
Press + repeatedly until the
2 |
D D
The appliance will open a temporary Wi-Fi network,
"Home Connect", for a few minutes with the password
"HomeConnect".
Using this temporary Wi-Fi network, the app will
transfer the name (SSID) and the password of
your home network to the extractor hood, thereby
enabling the extractor hood to connect to your
home network.
D D
If connection to the home network is successful,
flash on the display panel.
Follow the instructions in the app.
3 |
and indicators flash.
ƒ
D
2
and
D
„