Dell EqualLogic PS Series Installation And Setup Manual page 30

Installation and Setup Installing a PS6500 Array
Figure 2-12: Cable Management System – Not Installed
The cable management system is attached to the rear of the array chassis and to
the rack rails. See Figure 2-13.
Figure 2-13: Cable Management System – Installed
See the Rack Mount Instructions for information about installing the cable
management system.
To use the cable management system:
1. Gather the power cables and route the cables along the top arm of the three-
arm assembly, going from to , as shown in Figure 2-14. Make sure the
2–20