Opening And Closing The Camera; Inserting The Batteries/Connecting Power Supply - Silvercrest WK 8 A2 Quick Start Manual

Opening and closing the camera

The control buttons, connections and the battery compartment are
inside the camera.
♦ Undo both of the side locking clamps
♦ To close the camera, hook the metal bars of the locking clamps
into the brackets and then press the plastic latch downwards.
There is a locking eyelet
which you can securely close the camera with the help of a padlock.

Inserting the batteries/connecting power supply

♦ To insert batteries
♦ Now, press the latch on the underside of the battery compartment
cover down a little way and lift the battery compartment cover off.
♦ Insert 4 or 8 x 1.5 V AA/Mignon/LR6 batteries into the battery
compartment
and ensure that the batteries are placed on the black textile tape
as shown in the figure. The textile tape makes removing the bat-
teries easier.
NOTICE
► When using 4 batteries, these can either all be inserted in the
upper part or all in the lower part of the battery compartment.
Other combinations are not possible.
│ GB │ IE │ NI
■ 14
4
between the two locking clamps with
35
in the device, open the camera.
11
. While doing so, please note the stated polarity
AA
AA
AA
12
to open the camera.
WK 8 A2