GE Panda iRes Warmer Operation And Maintenance Manual page 37

Panda iRes Warmer M1110737 006
Illustration
© 2007 General Electric Company, all rights reserved
Step Description
3 Press the "Admit Baby" key to enter normal
operation in Manual Mode. Select Heater
Power percentage to silence the prompt
tone.
4
Connect the baby temperature probe to the
jack on the right side of the bed. If using
a Panda Warmer with an in-bed scale, the
temperature probe jack is above the In-bed
scale connection.
5 Check the skin probe. Warm it by placing
it between your fingers, and verify that the
baby temperature reading increases.
2-5