System Configuration： Mode Selection Method - Hitachi CA-HF1300-S3 Operating Instructions Manual

System configuration： Mode selection method
The system configuration can be changed by CCU menu.
Press the menu button on RU-1500JY, so that following menu will appear on CCU PIX output.
The operation mode can be changed by "CABLE TYPE" on the menu.
This change is available on STBY mode (camera power is off).
■ Ｃ Ｃ Ｕ Ｆ Ｕ Ｎ Ｃ Ｔ Ｉ Ｏ Ｎ
Ｂ Ｕ Ｚ Ｚ Ｅ Ｒ
Ｓ Ｄ Ｉ Ａ Ｕ Ｄ Ｉ Ｏ
Ｃ Ｃ Ｕ Ｉ Ｄ
Ｃ Ａ Ｂ Ｌ Ｅ Ｔ Ｙ Ｐ Ｅ
Ｐ Ａ Ｒ Ａ Ｍ Ｏ Ｄ Ｅ
Ｓ Ｙ Ｓ Ｆ Ｏ Ｒ Ｍ Ａ Ｔ
Ｔ Ｉ Ｍ Ｅ ／ Ｄ Ａ Ｔ Ｅ
CABLE TYPE
OPT HYBRID Optical fiber operation is available combined with camera adaptor (CA-HF1300-S3）.
Use a HFOC (Hybrid Fiber-Optic Cable) between the camera adaptor and CCU.
OPT SINGLE Optical fiber operation is available combined with camera adaptor (CA-HF1300-S3）.
Use a SMF (Single-mode Fiber) between the camera adaptor and CCU.
Supply external power (DC12V) to the camera adaptor , because CCU does not send power.
＜ ＞
: Ｅ Ｎ Ａ Ｂ Ｌ Ｅ
: Ｏ Ｆ Ｆ
: 1
: Ｏ Ｐ Ｔ Ｈ Ｙ Ｂ Ｒ Ｉ Ｄ
: Ｏ Ｆ Ｆ
: ＞ １ ０ ８ ０ ｉ
５ ９ ． ９ ４ Ｈ ｚ
: ＞ ０ ６ ． １ ２ ． ' １ ５
１ ９ : ５ ８
7