Removing The Compressor Casing; Fig. 38: Removing The Compressor Casing - ABB A145-M56 Operation Manual

Operation Manual / 4 Product description / A130-M.. - A145-M..
8 Dismantling and fitting / 8.7 Removing the compressor casing
8.7

Removing the compressor casing

Removing the compressor casing
Mark the casing position for assembly.
u
Fig. 38: Removing the compressor casing
1. Loosen screws (72011) and remove together with fastening strips (72012).
2. Attach swivel lifting eye (S) to the compressor casing and the lifting gear.
3. Remove the compressor casing (72000) and turn it 180°.
4. Remove and dispose of the O-ring (42012).
5. Undo screws (79041) and remove from the compressor casing (72000) with fixing
discs (79040) and diffuser (79000).
If the compressor casing cannot be loosened, it can be pressed off against the turbine cas-
→79).
ing using the press-off tool (90042) (see chapter Pressing off the casing
© Copyright 2020 ABB. All rights reserved. HZTL4031_EN Rev.K February 2020