Material Required; Fig. 30: Swivel Lifting Eyes; Table 33: Swivel Lifting Eyes - ABB A145-M56 Operation Manual

Operation Manual / 4 Product description / A130-M.. - A145-M..
8 Dismantling and fitting / 8.2 Material required
Oil orifice
When disassembling the turbocharger, an oil orifice fitted in the oil inlet must not be re-
u
moved (see also chapter Removing the cartridge group).
8.2

Material required

Customer spare part set
Before starting operations, make sure the required customer spare part set is available (see
chapter Spare parts →107).
Customer tool set
Before starting work, make sure the required tool set is available (see chapter
Not all tools are marked with a part number. Identification is guaranteed by the tool list. This
list is enclosed with the tool set.
WARNING
Servicing the tools
The tools must be checked for damage before and after use.
Visually inspect for corrosion, cracks, deformation and wear.
u
Damaged tools must no longer be used and must be replaced.
u
Swivel lifting eyes
Swivel lifting eyes are required for the safe lifting of loads, which are not supplied by ABB.
Fig. 30: Swivel lifting eyes
Product Thread M
A130 M10
A135 M10
A140 M12
A145 M12
Table 33: Swivel lifting eyes
© Copyright 2020 ABB. All rights reserved.
Length L [mm]
17 mm
17 mm
21 mm
21 mm
HZTL4031_EN
Minimum load limit [kg]
100 kg
150 kg
250 kg
300 kg
Rev.K
Tools →112).
Quantity
2
2
2
2
February 2020