Advertisement
BSPT the bundle characteristics can be filled in with the OM commands CHBNDC,
-
The maximum number of BSPTs per route is determined by NEBOUND 235.
-
Basic Service Profile (BSP)
-
A Basic Service Profile (BSP) is a set of user characteristics, identified by a DNR and a
Basic Service. The Basic Service is indicated by an IBSC and a Basic Service Profile
Type. The combination of DNR and BSPT is called a Basic Service Profile Identifier
(BSP-ID) and is used as a parameter in several OM-commands to identify a BSP.
-
A BSP is assigned to an EHWA using the OM command CHDNRC.
-
Compatibility Value (CV).
-
A default CV is allocated to DNRs using NEBOUND 008.
-
A default CV is allocated to a route using NEROUTE 211.
-
The CV of a DNR can be changed using the OM command CHAGCV.
-
The CV of a route can be changed using the OM command CHRTCG.
-
The maximum number of CVs in the network is determined by NEBOUND 032.
-
The CV for a data port can be used to download the parameters of a DCE. Such a CV
can be created using the OM command CRCVAL or changed using CHCVAL.
Downloading is done using DOWNLD.
The connection allowance of CVs is specified using the OM command CHCVCA.
Connectivity is determined as follows:
1. The IBSC of the calling party is compared with the BSPT of the called party according to
table
A.1. DETERMINING
be connected, unless prevented by the CV connection allowance.
2. The CV connection allowance is checked. If the connection allowance is 3, then the
connection is allowed. If the connection allowance is 2, then a modem is required in the
connection.
CONNECTIVITY. If a match is found then the two parties may
57
Advertisement
