Philips SOPHO Call@Net Manual page 91

Modem is used as a pool-modem in the leased line configuration for outgoing calls only:
the MLU expects a constant carrier on the line and guards the line.
When transmitting the modem uses the high band (STF - CT126 on).
The communication speed is fixed to high speed (DSRS - CT111 on).
BIT 0 BIT 1
1 1
• 161C
Modem is used as a pool-modem in the leased line configuration for both incoming and
outgoing calls: the MLU does not expect a constant carrier on the line.
When transmitting the modem uses high or low band (STF - CT126 switched).
The communication speed is fixed to low speed (DSRS - CT111 off).
BIT 0 BIT 1
1 0
• 161E
Modem is used as a pool-modem in the leased line configuration for both incoming and
outgoing calls: the MLU does not expect a constant carrier on the line.
When transmitting the modem uses high or low band (STF - CT126 switched).
The communication speed is fixed to high speed (DSRS - CT111 on).
BIT 0 BIT 1
1 0
• 1620
Modem is used as a pool-modem in the leased line configuration for both incoming and
outgoing calls: the MLU does not expect a constant carrier on the line.
When transmitting the modem uses low band (STF - CT126 off).
The communication speed is fixed to low speed (DSRS - CT111 off).
BIT 0 BIT 1
1 0
• 1622
Modem is used as a pool-modem in the leased line configuration for both incoming and
outgoing calls: the MLU does not expect a constant carrier on the line.
When transmitting the modem uses low band (STF - CT126 off).
The communication speed is fixed to high speed (DSRS - CT111 on).
BIT 2 BIT 3
0 1
don't care
BIT 2 BIT 3
0 0
don't care
BIT 2 BIT 3
0 1
don't care
BIT 2 BIT 3
0 0
don't care
BIT 4 BIT 5
1 0
BIT 4 BIT 5
0 1
don't care
BIT 4 BIT 5
0 1
don't care
BIT 4 BIT 5
0 0
don't care
BIT 6 BYTE 0
1 H`FF'
don't care
BIT 6 BYTE 0
0 H`FF'
don't care don't care
BIT 6 BYTE 0
0 H`FF'
don't care don't care
BIT 6 BYTE 0
0 H`FF'
don't care
91