Connections; Connecting To External Audio Equipment; Connecting Stereo Powered Speakers; Connecting To A Mixer - Yamaha CS6X Owner's Manual

Connections

Connecting to External Audio Equipment

Since the synthesizer has no built-in speakers, you need to monitor its sound output via external
audio equipment. Alternatively, you could use a pair of headphones.
There are several methods of connecting to external audio equipment, as described in the following
illustrations.
The CS6R also needs an external MIDI controller such as a keyboard, though this is not necessary when using
the internal sequencer. For MIDI connections, see the next section.

Connecting Stereo Powered Speakers

A pair of powered speakers can accurately produce the instrument's rich sounds with their own pan
and effect settings. Connect your powered speakers to the OUTPUT L/MONO and R jacks on the
rear panel.
INPUT
OUTPUT
PHONES
L/MONO
When using just one powered speaker, connect it to the OUTPUT L/MONO jack on the rear panel.

Connecting to a Mixer

There are extra audio outputs in addition to the OUTPUT (L/MONO and R) jacks. These four
outputs can connect to a mixer for separately controlling the outputs of up to four Parts in
Performance Mode (Page 117). You can specify the output routing of each Part in Performance Edit
Mode (Page 133).
INPUT
OUTPUT R
C
CS6x
13
INPUT INPUT
OUTPUT
OUTPUT R
L/MONO
PHONES CS6R