5 Start-up, Service and Maintenance
are started up using the SimoCom U start-up tool, except the
SIMODRIVE POSMO A.
SIMODRIVE 611 universal / E and POSMO SI, CD/CA
Fig.5-2
The SimoCom U start-up tool is part of the 611U toolbox supplied with the
SINUMERIK 840Di and can additionally also be acquired by downloading from the
following address:
http://www.ad.siemens.de/mc/html_00/info/download/
The most important functions of this start-up tool are:
•
Establishment of an online connection to the drives
•
Firmware upgrades
•
Optimization of control parameters
•
Traversing of axes
•
Diagnosing the drive status
•
Saving and loading of parameters
•
Comparison of parameter sets
•
Resetting to the factory default settings
-44
5
The SimoCom U start-up tool
© Siemens AG 2001 All Rights Reserved
SINUMERIK 840Di System Overview (SYI) - 02.2001 Edition
02.2001