Download Print this page
Sealey PH20.V4 Instructions

Sealey PH20.V4 Instructions

2tonne folding crane

Advertisement

Quick Links

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT
CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear
instruction
protective
manual
footwear
1. CONTENTS
Section 2.
General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.
Section 2.1 Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.
Section 2.2. Technical Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.
Section 3.
Safety / Operational Instructions. . . . . . . . . . . . . . . . . .2.
Section 4.
Section 5.
Assembly / Storage. . . . . . . . . . . . . . . . . . . . . . . . . . . .3.
Section 6.
Owner's & Operator's Responsibilities . . . . . . . . . . . . .3.
Section 7.
Declaration of Conformity. . . . . . . . . . . . . . . . . . . . . . .4.
Section 8.
Parts List and Diagram . . . . . . . . . . . . . . . . . . . . . . . . .5.
2. GENERAL
2.1.
Identification
Supplier:
Sealey Power Products,
Kempson Way,
Suffolk Business Park,
Bury St Edmunds,
Suffolk, IP32 7AR.
Model No:
PH20.V4
2.2. Technical Data.
Rated Capacity
Working Load Limit (WLL) 2tonne (tested to 50% overload).
Position 1: . . . . . . . . . . . . . . . . . . 2000kg
Position 2: . . . . . . . . . . . . . . . . . . 1500kg
Position 3: . . . . . . . . . . . . . . . . . . 1000kg
Position 4: . . . . . . . . . . . . . . . . . . 500kg
Weight: . . . . . . . . . . . . . . . . . . . . . 83kg
© Jack Sealey Limited
INSTRUCTIONS FOR:
2TONNE FOLDING CRANE
MODEL No:
Wear
protective
gloves
Page No.
Original Language Version
PH20.V4
fig.1
PUMP HANDLE ASSY.
RELEASE VALVE
page 1
PH20.V4
Issue: 4 - 26/06/17

Advertisement

loading

Summary of Contents for Sealey PH20.V4

  • Page 1: Table Of Contents

    PH20.V4 MODEL No: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
  • Page 2: Safety / Operational Instructions

    The ram is filled with oil and should only require occasional topping up. For the occasional top up DO NOT use brake fluid, as this will damage the hydraulic seals. Proceed as follows: 1) Use only good quality hydraulic jack oil available from your Sealey supplier. 2) DO NOT OVERFILL as this will cause failure.
  • Page 3: Assembly / Storage

    Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk...
  • Page 4: Declaration Of Conformity

    … 89/686/EEC PPE Directive … 2014/29/EU Simple Pressure Vessels Directive … 2014/53/EU RTTE Directive Manufacturer’s authorised representative within the EC: Jack Sealey Ltd, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR Conforms to the requirements of the Directives, as indicated�...
  • Page 5: Parts List And Diagram

    8. PARTS LIST AND DIAGRAM page 5 Original Language Version PH20.V4 Issue: 4 - 26/06/17 © Jack Sealey Limited...