Yamaha AV-S7 Owner's Manual page 17

CONNECTIONS
Connection to a TV without an AUDIO OUT terminal
1
Connect the SYSTEM CONNECTOR (Refer to page
12).
2
Connect the AUDIO OUTPUT terminals on the VCR
to the INPUT1 terminals on the SW-AVS7.
Center speaker
(NX-AVS7)
SYSTEM
CONNECTOR
MARK
TV
VCR
• If the AV-S7 system is set to STANDBY or the turned off, the signal applied to INPUT 1 is sent to the THROUGH terminal of
INPUT 1.
• Use the volume control of the TV when playing back sound from the TV or VCR without using the AV-S7.
System connector cable (provided)
SYSTEM
CONNECTOR
MARK
System
connector
L
R
VIDEO AUDIO
INPUT INPUT
Audio connection
*1
cord (provided)
L
CD or MD
R
player
VIDEO AUDIO
OUTPUT OUTPUT
E-13
3
Connect the THROUGH terminals of INPUT 1 to the
AUDIO INPUT terminals on the TV using connector
cable (optional).
* A signal is applied to INPUT 1 at the THROUGH
terminals only when the AV-S7 is off.
4
Connect the INPUT 2 terminals (Refer to page 12).
*2
L
R
MARK
*3
1 2
THROUGH
SYSTEM
CONNECTOR
INPUT
*3
L
R
AUDIO
OUTPUT
*1 : Video connection cable (optional)
*2,3 : Audio connection cable (optional)
Power amplifier/subwoofer
(SW-AVS7)
L
R
MARK
1 THROUGH 2
R L R L
SYSTEM
INPUT CONNECTOR FRONT FRONT