■ Viewing Faders and On/Off Parameters
To display the View | Fader page, use the corresponding [SEL] button or fader to select the
desired Aux Out (1–8), then press the DISPLAY ACCESS [VIEW] button, then the [F2] but-
ton.
• ON/OFF.........................This button turns the currently-selected Aux Out (1–8) on or
• Fader ..............................This fader sets the currently-selected Aux Out (1–8) level. It
Setting Aux Out 1–8 from the Display
off. It links with the corresponding [ON] (1–8) button in the
Master layer.
links with the corresponding fader (1–8) in the Master layer.
The fader knob is highlighted when the fader is set to 0.0dB.
DM1000 Version 2—Owner's Manual
97
8