Table of Contents
Advertisement
4.3.2.
carefully position display panel into position, making sure wiring is
not twisted.
4.3.3.
insert the three screws through
the back panel and into the aligned
display panel.
4.3.3.1.
install the threaded shaft.
4.3.4.
Tighten threaded shaft with Hex key
4.3.5.
Install wheel guard with supplied screws and tighten with Hex key.
4.3.6.
install side handles.
© Jack sealey limited
Original Language Version
WB10 | Issue 1 05/02/18
Advertisement
Table of Contents
