Resetting A Function's Value - Yamaha Clavinova CVP-105 Owner's Manual

Resetting a Function's Value

After you have changed a function's value, you may find you want to
restore its basic setting. To demonstrate this, we'll have to look at another of
the Clavinova's displays. Press the [FUNCTION] button.
This button calls up one of the Clavinova's FUNCTION displays. You
can use this display to tune and transpose the keyboard.
The TUNE function in this display has
ones you used in the VOICE SELECT display. You can use these buttons to
tune the keyboard up or down. Press and hold the
dial or the [–] button) to tune the keyboard down as far as it will go.
If you play a few notes, you'll notice that your Clavinova is flat by quite
a bit. Now, let's assume that you want to reset the keyboard to the standard
440.0 Hz. You could use the
return the value to its basic setting — but there's an easier way:
When a function has a basic setting, you can reset it to that value by
pressing both the and
multaneously. Try doing this now.
When you've got the keyboard back in tune, you're ready to go on to the
next operation.
MASTER
SONG EQUALIZER
MIXER FUNCTION
and
button (or the data dial, or the [+] button) to
buttons (or both the [–] and [+] buttons) si-
Using the LCD Display Controls
LCD buttons like the
button (or use the data
Basic settings
• The functions of the Clavinova are set
to certain standard values or standard
conditions when the instrument is
shipped. These settings and conditions
are called the basic settings.
• A function's basic settings are gener-
ally noted in the sidebar together with
the possible settings for that function.
• You can also use the Recall function
(page 207) to restore basic settings at
any time.
Refer to page 188 for details on the
TUNE and TRANSPOSE functions.
There are some functions whose settings
cannot be returned to the basic value by
pressing the and buttons (or [–] and
[+] buttons) simultaneously.
CVP-109/107/105/700
19