Other Auto Accompaniment Functions
Selecting a Harmony Type
You can change the type of harmony that is played using the HAR-
MONY TYPE function in the HARMONY display.
Z Select the HARMONY TYPE function.
If necessary, press one of the LCD buttons under the HARMONY
TYPE function.
The HARMONY TYPE function is highlighted.
X Select a harmony type.
Use the left and right LCD buttons to select a harmony type. If neces-
sary, use the PAGE [<] or [>] buttons to display additional harmony
types.
The selected harmony type is highlighted.
You can also change the harmony type with the HARMONY TYPE
and
buttons, the data dial, or the [–] and [+] buttons. To restore the
basic setting for the currently selected main voice, press the HAR-
MONY TYPE
ously.
Since the basic setting of the HARMONY TYPE function depends on
the currently selected main voice, a different harmony type may be
selected automatically if you change the main voice selection.
88
CVP-109/107/105/700
........................................................................
and
buttons or the [–] and [+] buttons simultane-
Harmony Types
Type
Effect
Duet
Trio
Block
4 Part
Country
Octave
1+5
Echo
–
Tremolo
–
Trill
–
Strumming
–
Add Jazz Gtr
–
Add Brass
–
Add Strings
–
In The Forest
–
Speed
–
–
–
–
–
–
–
–
–
–
–
–
HARMONY TYPE function
• Settings: See table on this page.
• Basic setting: Depends on main voice.
• On the CVP-109/107/700, effects
applied to the main voice will also be
applied to the harmony part when
certain harmony types (indicated by a
" " in the Effect column of the table at
left) are selected.
• Some harmony types (indicated by a
" " in the Speed column of the table at
left) have a speed setting that can be
adjusted. See the next topic for details.