MAINTENANCE BASICS
REGULAR REPLACEMENT OF SAFETY-RELATED PARTS
The user must service the machine regularly to ensure troublefree
operation of the machine.
CAUTION
Worn safety-related parts may cause accidents!
Replace all parts which are relevant for the security of the
machine and for fire prevention on a regular basis.
The following parts must be replaced regularly - even if they appear to be
fully functioning:
•
The seatbelt must be replaced every three years at the latest.
•
Hoses should not be used longer than six years under normal
loads.
•
Hoses must be replaced as soon as any damage becomes
apparent:
Damage includes:
•
Damage to the outer layer as far as the intermediate layer
•
Brittleness of the outer layer
•
Deformation in pressurized or non-pressurized state which
does not conform with the original form of the installed hose
•
Leaks
•
Damage to the hose fittings or the connection between fitting
and hose
•
Warehouse damage (warehouse storage for hoses should
not exceed 2 years)
•
Always exchange the respective O-rings, seals and similar parts
as well when replacing hoses.
3-12