Shot Of Steam Function - Siemens TSi80 Series Operating Instructions Manual

2x
26
S IE ME N S
5. Steam modes
This iron generates steam by means of a built-in
motor. While the motor is working, the motor lamps
(15) of the water tank come on.
The iron is equipped with a sensor and an electronic
system to adapt the amount of steam to the mode of
use, optimising both the ironing and the service life
of the appliance.
The iron is itted with two steam production modes.
The mode can be changed by double-clicking
the steam activation trigger (16).
A "autoSteam" mode
The indicator lamp (5) is on.
The iron will automatically set the appropriate steam
amount which is suitable for the selected ironing
programme.
The steam will be produced continuously.
B "Steam on demand" mode
The indicator lamp (5) is off.
Steam production can be controlled manually for
steam ironing only when necessary.
1 For ironing with steam, press the steam
activation trigger (16).
For ironing without steam (dry ironing), do not
2
press the steam activation trigger.
Tip:
For better ironing results, iron the last strokes
without steam to dry the garment.

6. Shot of steam function

shot
Shot of steam can be used to remove stubborn
wrinkles or to press in a sharp crease or pleat.
Set the temperature to at least the "●●" position.
1
Press the shot of steam button (7) repeatedly
2
with intervals of at least 5 seconds.