Setting The Start Point And End Point - Yamaha SU200 Owner's Manual

Setting the Start Point and End Point

Use this feature to select the range of the sample that plays out. Playback starts at the set start
point, and ends at the set end point.
A B
Start Point
Make these settings using the [START POINT] and [END POINT] buttons. You can clear either of these set-
tings using the [POINT CLEAR] button.
• The SU200 automatically recalculates and displays the sample's BPM (tempo) based on the
NOTE
playback length from start point to end point. When you change the start point or end point,
the BPM indication changes accordingly.
Easy Setting (While Listening To Playback)
Z
Press the pad that you want to set, to begin playback.
X
When playback reaches the point that you want to set as the start point, press the
[START POINT] button.
START
POINT
C
When playback reaches the point that you want to set as the end point, press the
[END POINT] button.
START
POINT
V
Press the [EXIT] button.
The SU200 stores the settings and returns to Pad-Play mode.
Precise Setting
Z
Press and release the pad that you want to set, so that playback starts and then
stops.
30
Chapter 2 Playing the Pads
Sample
C D E
End Point
END POINT
POINT CLEAR
END POINT
POINT CLEAR
bpm120
StPnt
bpm120
EdPnt
EXIT
If one-shot playback: CD
If loop playback: CDCDCD...
1812
15125