Connecting To Other Midi Devices - Yamaha MU80 Owner's Manual

GUIDED TOUR
Operation
1 Set the HOST SELECT switch to PC-2.
2 Connect the MU80 to the host computer, as shown in the illus-
tration above. Use a standard computer cable (8-pin Mini DIN
to 9-pin D-SUB; see page 32).
3 Turn on the the host computer, then the MU80.
4 Start up your music software, and set up the appropriate options
on the software for operation with the MU80.
Refer to the owner's manual of your particular music software for more in-
formation.

Connecting to Other MIDI Devices

The MU80 is equipped with MIDI IN and OUT terminals, allowing you to use
it in any MIDI system. Example uses for the built-in MIDI interface include:
Connecting to a MIDI keyboard (for playing the sounds of the MU80
from that keyboard).
Connecting to a computer equipped with a MIDI interface (either in-
ternal or external).
Connecting to a hardware sequencer (such as the Yamaha QY300).
Connecting to a MIDI data storage device (such as the Yamaha MDF2
MIDI Data Filer).
2 8
MIDI CABLE
MIDI OUT
Sequencer
MIDI IN