Connecting A Foot Switch; Connecting External Midi Devices - Yamaha QY700 Owner's Manual

SETUP

Connecting a foot switch

When using a separately sold FC4 or FC5 foot switch, insert the foot switch plug into the foot switch jack located on the rear panel.
FOOT SW

Connecting external MIDI devices

Connecting a MIDI keyboard
Realtime recording or fingered chord input will be easier if you use a MIDI keyboard.
Use a MIDI cable to connect the MIDI OUT of the external MIDI keyboard to the MIDI IN-A or IN-B connector on the rear panel.
OUT-B
Connecting a tone generator module
QY700 song and pattern playback data can be used to play an external tone generator module.
Use a MIDI cable to connect the MIDI OUT-A or OUT-B connector on the rear panel to the MIDI IN connector of the external MIDI device.
OUT-B
20
POWER
OUTPUT
R L/MONO PHONES DC IN ON OFF
MIDI
OUT-A IN-B IN-A
MIDI
OUT-A IN-B IN-A
FC4 or FC5
A B C D
MIDI IN
A/D
INPUT
PHONES POWER/VOL
PART MIDI BANK/PGM# VOL EXP PAN REV CHO VAR KEY
PUSH ON/OFF
MIDI
OUT
MUTE/ PART
PLAY EDIT SOLO ALL
UTIL EFFECT ENTER SELECT
XG
MODE EQ EXIT VALUE
TG300B
C/M
PERFORM