Realtime Recording: Sequence Tracks (Tr1 - Yamaha QY700 Owner's Manual

5. Song Recording
Realtime Recording: Sequence Tracks (TR1,...,TR32)
Recording track
SHIFT F1
• You use this function to record a performance in real time.
You can input the performance using the QY700
microkeyboard, a remote MIDI keyboard, or some other
type of remote MIDI device
• This section describes the
(OVERDUB) realtime recording methods. The
(PUNCH) method, which is also realtime, is described on a
later page.
• You use the
overwrite any data already existing on the track – for exam-
ple, when you want to redo a phrase that you are not satis-
fied with.
• You use (OVERDUB) when you want to add your
new performance data to the data already contained in the
track. This allows you to build up a complex phrase by re-
cording it as a combination of several parts.
1. At the SONG PLAY screen, press
The QY700 displays the Recording Standby page. The RE-
CORDING indicator comes on.
2. Press (REPLACE) or
select the recording method.
3. Press
select the track you want to record.
4. Press .
The PLAY indicator begins flashing. The QY700 counts
out the specified number of lead-in measures (as set by the
COUNT parameter; see page 78), and then begins the re-
cording.
5. Input the performance data from the microkeyboard
or your remote MIDI instrument.
112
F2 F3 F4
(REPLACE ) and
(REPLACE) method when you want to
.
(OVERDUB) to
or as necessary to
Chapter 2. SONG MODE
Recording mode
F5 F6 SHIFT
6. When you are ready to stop recording, press
The QY700 returns to the SONG PLAY screen.
• You can use song job 00 (UNDO/REDO) to cancel a re-
cording that you have just made. This allows you to recover
data that you have inadvertently over-recorded. (
• Remember to set the appropriate parameters (such as meas-
ure, tempo, meter, click beat, click mode, count, and trans-
position) before beginning the recording. (
• If you have selected a style number and section, the QY700
will start pattern replay at the same time that it starts to
record. If you don't want to hear a pattern, set the style
number to 00.
• If you have selected a pattern whose section connection is
set to End, the QY700 will automatically stop recording
when the pattern playback reaches its end. If you do not
want this to happen, select a different pattern or else change
the section connection setting. (
• You can use the
multaneous recording of multiple MIDI channels.
(
• Sequence tracks can record system-exclusive data, subject
to memory constraints. (You can use your QY700 as a MIDI
data filer.)
• If you input your recording using the QY700 keyboard keys,
the velocity for each note is set to 88( f ). If you want true
recording of velocity values, use a remote MIDI keyboard
for the input.
• Before recording onto the QY700 from a remote keyboard,
go to UTILITY mode and set the MIDI "echoback" setting
to "RecMonitor". (
SONG PLAY
Song recording
Replace
Overdub
TR1~TR32
PATTERN
CHORD
TEMPO
EXIT
(MULTI) function to make a si-
p.110)
p.292)
.
p.141)
p.109)
p.202)