Yamaha QY700 Owner's Manual page 106

Yamaha music sequencer owner's manual
Hide thumbs Also See for QY700:
Table of Contents

Advertisement

3. TO TG channel setup
• You use this parameter to set the channel over which each
track transmits to the tone-generator block.
• The figure below shows the relationship between the
sequencer block (sequence and pattern tracks) and the tone-
generator block.
• It is permissible to assign multiple tracks to the same TG
part (the same channel number).
• If you want to direct a track's data to an external MIDI de-
vice only (and not to the tone generator block), set this value
to Off.
• All output-channel settings are stored separately for each
song.
Sequencer block
Track
TO TG
1
1
2
2
16
16
17
off
18
off
32
off
1
17
2
18
16
32
Off
Track data not sent to TG block.
0101
1101
1,...,32
Track data sent to corresponding TG part.
1. Move the cursor to the TO TG area for the track you
want to set.
2. Set the value using the data dial,
meric keypad.
Tone generator (TG) block
Part
1
2
16
17
18
32
/
, or the nu-
Chapter 2. SONG MODE
4. MIDI OUT-A and MIDI OUT-B channel
setup
• You use these settings to assign tracks to MIDI channels.
• During playback, the QY700 adds corresponding MIDI
OUT channel identification data to each track's perform-
ance data, and sends the result to the corresponding MIDI
OUT connector (A or B). Refer to the illustration below.
• If you do not want to transmit the track data to the MIDI
OUT connectors, set both MIDI-OUT values (MIDI OUT-
A and MIDI OUT-B) to Off. Note that you can still produce
the track data through the tone generator block, by setting
an appropriate value on the TO TG line.
• All output-channel settings are stored separately for each
song.
Sequencer block
Track
1
Off
Off
2
Off
16
17
18
32
1
2
16
Off
QY700 does not send data to MIDI OUT.
0101
1101
1,...,16
QY700 sends data out over corresponding
MIDI channel, via corresponding MIDI OUT
connector (A or B)
1. Move the cursor to the MIDI OUT-A or MIDI OUT-B
area for the track you want to set.
2. Set the value using the data dial,
meric keypad
4. Output Channels
MIDI OUT-A
MIDI OUT-A
1
2
16
MIDI OUT-B
MIDI OUT-B
1
2
16
/
, or the nu-
.
105
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents