Voice Select - Yamaha QY700 Owner's Manual

1. Select a non-empty track using
or the left or right cursor key.
2. To mute the track : Press
appears.
To release a mute : Press
3. To set the track to SOLO : Press
appears.
To deselect SOLO : Press
• You can easily use this feature to listen to your tracks one
by one. Begin by playing one of the tracks solo, then move
the cursor to select the next track, then press
Note that each time you press
selection is automatically canceled.
4. You can also use the solo feature to select multiple
tracks for "solo" play, so that only the selected tracks
are produced (with all other tracks silent). Begin by
setting one of the tracks to SOLO as described above.
Then move the cursor to another track and then
+ .
• To cancel all of these solo selections at once : Move the
cursor to any one of the tracks, and press
To switch off only one of the solo selections : Move to the
corresponding track, and press

5. Voice select

• This parameter determines whether each phrase on the track
uses its own voice, or whether all phrases on the track use
the voice selected at this Mixer page.
• If you set the value to Phr (Phrase), then each phrase is
produced in its own voice, and the mixer's voice settings
(voice category, program-number, and bank-number set-
tings) are disabled – and are blanked out on the screen.
• If you set the value to Pat (Pattern), then all phrases on the
track are produced using voice selected by the mixer's voice-
category, program-number, and bank-number settings (see
below).
Phr, Pat
0101
1101
/
key once, so that an
once again.
, so that an
once again.
again.
, any previous SOLO
.
+ .
Chapter 5. PATTERN MODE
6. Voice category
• This value selects the general voice category, as given by
the bank-select MSB (the most significant byte of the two-
byte bank value). Available choices are as follows.
• The icon selects the "normal voice" category (MSB
000).
• The icon selects the "SFX voice" category (MSB 064).
(Note that SFX is an acronym for "sound effects".) Each
voice in this category produces a single effect-type sound
over the full range of the keyboard, with different keys pro-
ducing the sound in different pitches (as with a normal
voice).
• The icon selects the "SFX kit" category (MSB 126).
Each voice in this category provides a full range of effect-
type sounds, with a different sound assigned to each key of
the keyboard (as with a drum voice).
• The icon selects the "drum voice" category. Each voice
in this category consists of a "drum kit" of percussion
sounds. This gives you access to multiple drum kits — so
that you can assign a different kit to each of your drum tracks.
• The icon selects the special "drum setup-3" category.
This is a special category that allows you to implement note-
by-note editing for any one of your drum kits. (You edit the
sound using the Drum-Setup Edit screen; see page 235.)
The category consists of a single voice only (as selected
and edited by you); all tracks set to this category will there-
fore produce the same voice.
Normal Voice
0101
1101
SFX Voice
SFX Kit
Drum Voice
Drum setup-3
Off
(No selection)
3. Pattern Voice submode
229
5