Realtime Recording: Tempo Track - Yamaha QY700 Owner's Manual

Realtime Recording: TEMPO Track

Recording track
SHIFT F1 F2
• You use this function to record tempo changes for the song.
• This section describes the
recording method. When you record with this method, you
overwrite any data already existing on the track.
• Note that it is not possible to select the
method for TEMPO-track recording.
= 25.0,...,300.0
Tempo:
0101
1101
1. Starting from the SONG PLAY page, press
The QY700 displays the Recording Standby page. The RE-
CORDING indicator comes on.
2. Press (REPLACE).
3. Press
the recording track to TEMPO.
4. Press .
The PLAY indicator begins flashing. The QY700 counts
out the specified number of lead-in measures (as set by the
COUNT parameter; see page 78), and then begins the re-
cording. The cursor automatically moves to the tempo en-
try area.
F3 F4 F5
(REPLACE ) realtime
(OVERDUB)
or as necessary to set
Chapter 2. SONG MODE
Recording mode
F6 SHIFT EXIT
5. Make the required tempo changes using the data dial,
/
The tempo changes are recorded as you make them.
6. When you are finished recording the tempo changes,
press
The QY700 returns to the SONG PLAY screen.
.
5. Song Recording
SONG PLAY
Song Recording
Replace
Overdub
TR1~TR32
PATTERN
CHORD
TEMPO
, or the numeric keypad.
.
2
117