Track Edit - Yamaha QX5 Owner's Manual

TRACK EDIT
This is where you perform operations on whole tracks and macros. To enter this mode, press [SHIFT] +
[TRACK EDIT]. In each job, the upper right corner will display the amount of free memory (in 80 note blocks),
and the amount of memory occupied by each track or macro is displayed in parentheses "( )". If the memory size
is greater than 99, 99 is displayed.
Free memory
1>EXCHANGE 199
TR1 (01) TR1 (01)
Size of track
SHIFT TRACK
———
TRACK EDIT
Track Edit has 10 jobs.
Select the job you want by pressing [JOB]. Pressing [SHIFT] + will step backwards.
SHIFT E
JOB
kai S L S
Joa
1> EXCHANGE 2> COPY 3 >TR,DOWN 4> CLEAR
10 >SHIFT 9 > THIN OUT 6 > INSERT
8 > CLOCK MOV 7 > EXTRACT
Set Parameters and As explained in Measure Edit (p. 25), press [CURSOR] to move the blinking cursor
Execute to the data you want to change, use <jm to change the data, and press
ENTER] to execute the operation.
You can freely swap the contents of tracks 1-8 and macros 1-32. Use the
1. EXCHANGE CURSOR] and <i keys to select what you will exchange.
1>EXCHANGE 191
TRA (00) TR1 (25)
When you have finished recording, you will usually want to Exchange track 1 (the
newly recorded track) with an empty track.
Copy the contents of a track or macro to another track or macro. The old data in
2. COPY the copy destination will be lost.
2>COPY 191
TRA (05) MO6 (00)
Original Track Destination
or Macro
30