Yamaha QX5 Owner's Manual page 35

LOAD / SAVE
This is where you load and save sequence data, and store and recall QX5 setups. To enter this mode, press
SHIFT] + [LOAD/SAVE}.
Load/Save has 7 jobs.
SHIFT F CLOCK 1>TAPE SAVE
LOAD/SAVE TR1. . TR1 (001)
Press to select the function you want. [SHIFT] + will step backwards.
1. TAPE SAVE
Save Which Tracks and
Macros?
SHIFT EJ ED
eC IL —
JOB
1 > TAPE SAVE 2>TAPE LOAD
3 > TAPE VERIFY
7 > SETUP RECALL 6 > SETUP STORE 5> MIDI RECEIVE
As shown below, using the included cable, connect the OX5 Tape In to the earphone
jack of a cassette recorder. Connect Tape Out to the microphone jack. It is best
to use a cassette recorder and tape especially designed for personal computer data
storage.
4> MIDI TRANSMIT
TAPE IN ———~-———————- EARPHONE
TAPE OUT ———————————_ MIC
Press while pressing [SHIFT]. Use and <i to select
which tracks and macros you are going to save. To save all tracks and macros you
would select "TR1..M32". The number at the right indicates the size (in blocks of
80 notes) of the data you are saving. If empty tracks or macros are specified, they
are simply skipped.
1>TAPE SAVE
TR7..MO3 041
Save from .. to Total size of memory to be saved
34