Pattern Track Recording - Yamaha QY700 Owner's Manual

BASIC CONCEPTS

Pattern track recording

Recording the Song mode Pattern track
• You will record styles and sections on the Pattern track of
Song mode.
• If Styles and Sections have been entered into the Pattern
track, patterns will change automatically when the song is
played back.
• Here we will use Step Recording to record Styles and Sec-
tions on the Pattern track.
1. Enter Song mode.
• Press to enter Song mode.
Song number
Pattern track
Style
001 01 FuncDeGo
: :
010
: :
022
: :
031
2. Select the song number.
• Move the cursor to the song number, and use the data dial,
/ or numeric keypad
3. Press
the Pattern track.
4. Press to enter Recording Standby condition.
60
Section
[A] intro
:
[E] fill2
:
[D] fill1
:
[F] ending
to enter 01.
/ to move the cursor to
5. Press
recording mode.
6. Press
7. Move the cursor.
• Move the cursor to the locations for entering Style and Sec-
tion.
• First move the cursor to the Section for measure 001.
8. Enter the styles and sections.
• Use the data dial or
tions.
• Styles can also be enter using numeric keypad
• Sections can also be enter using the E2 – E3 microkeyboard.
• For locations which are blank, the pattern that was speci-
fied for the previous measure will be repeated.
• For the measure 001 Section, specify [A]intro.
Repeat steps 7 – 8 to input all the items from the above
table.
9. When all record has been completed, press
recording.
Chapter 1
(STEP) to select Step Recording as the
to start step recording on the Pattern track.
/ to enter the styles and sec-
.
to stop