Gate-Time Multiplier - Yamaha QY700 Owner's Manual

where "interval time" refers to the number of clock cycles be-
tween interval lines. Note that positive values shift notes to-
ward the end of the song, while negative values shift them to-
ward the beginning.
1. Move the cursor to the clock-shift setting (in the grid
area) for the appropriate interval.
2. Adjust the value using the data dial,
numeric keypad.

13. Gate-time multiplier

• This value adjusts the gate times for each interval.
• If you are using a preset template, you can not change these
values. If you are using a user template, you can edit the
values as described below.
• The multiplier is only one of the factors determining the
final gate-time adjustment. Specifically, the gate time is
adjusted by the combined action of the multiplier and the
GROOVE GATETIME setting (see Section 9 above).
000%,...,100%,...,200%
0101
1101
1. Move the cursor to the gate-time multiplier setting (in
the grid area) for the appropriate interval.
2. Set the value using the data dial,
meric keypad.
14. Velocity offset
/ , or the
0101
1101
/ , or the nu-
Currently selected
groove template
0101
1101
Chapter 2. SONG MODE
• This value applies offsets to the velocity values. Again, off-
sets can be different for each interval.
• If you are using a preset template, you can not change these
values. If you are using a user template, you can edit the
values as described below.
• This offset is only one of the factors determining the final
velocity adjustment. Specifically, the velocity is adjusted
by the combined action of the offset and the GROOVE VE-
LOCITY setting (see Section 10 above).
–99%,...,00%,...,+99%
1. Move the cursor to the velocity-offset setting (in the
grid area) for the appropriate interval.
2. Set the value using the data dial,
meric keypad.
(CopyTmp) Copy template
• This function copies the currently selected groove template
into the user template for a designated song or style.
• You can set up one user template for each song, and one for
each style.
• The values in the window select the destination.
Copy
Song 01,...,20; Patt 01,...,64
Destination:
1. At the "Groove View" page, select
The screen displays the Copy to User Template window.
2. Select the destination values (Song or Patt in the left
box, and the appropriate number in the right box) us-
ing the data dial, / , and numeric keypad.
2. Play Effects
2
/ , or the nu-
User template for
selected destination
(song or style)
(CopyTmp).
89