Yamaha QY700 Owner's Manual page 158

JOB 14 THIN OUT
• You use this job to remove some occurrences of a specified
non-note event within the designated segment of a selected
track. The purpose is to reduce the data volume and free up
additional memory.
• Specifically, the job will remove every other occurrence of
the event in areas where the event recurs within 60 clock
cycles. The job will not remove an event that is separated
from the previous occurrence by at least 60 clock cycles.
1. Track setting
• The TR value selects the target track.
01,...,32, Tmp
0101
1101
• 01,...,32
Sequence track
• Tmp
TEMPO track
2. Segment
• The two boxes to the right of the M select the track segment
to be thinned.
001:1,...,999:8
Measure: beat
0101
1101
3. Event
• The bottom pair of boxes select the targeted event type.
• Note that these settings are available only when you are
working on a sequence track. If you have selected the
TEMPO track, the QY700 will automatically target tempo-
change events.
PB, CC (000,...,127), CAT, PAT
0101
1101
• PB
Pitch bend
• CC(000,...,127) Control change (Any single control-
change message type, 000 to 127)
• CAT
Channel aftertouch
• PAT
Polyphonic aftertouch
Chapter 2. SONG MODE
7. Song Jobs
2
157