Yamaha QY700 Owner's Manual page 196

• If Variation Mode is set to Insertion, setting the Effect Type
of the Variation effect to "No Effect" will mean that the part
whose Variation Switch is ON will not sound.
2. Effect parameters
• Here you can make detailed settings for each effect.
• Each effect type has different parameters.
3. Dry/Wet (only for Variation edit)
• This sets the balance between the sound processed by the
Variation effect (the "Wet" sound), and the unprocessed
sound (the "Dry" sound).
• This can be set only if Variation Type = Insertion. If Varia-
tion Mode = System, this will be fixed at D32>W.
D63>W – D=W – D<W63
0101
1101
4. Control (only for Variation edit)
• A symbol will be displayed to indicate a parameter that
can be controlled using control change messages.
• When Variation Type is set to Insertion, this can be used for
parts whose Variation switch is ON.
5. AC1 control (only for Variation edit)
• This specifies the depth with which AC1 (assignable con-
• With a setting of 0, control will not be possible. As this
• Assignable controllers are controllers whose control number
• This can be set only when Variation Type = Insertion. This
-64 – +0 – +63
0101
1101
Chapter 4. EFFECT MODE
2. Reverb edit, Chorus edit, Variation edit
troller) can be used to control the parameter indicated by
the control symbol.
setting is increased, a greater amount of control will be pos-
sible. With negative settings, raising the controller will lower
the parameter value.
can be set freely. The QY700 provides two assignable con-
trollers: AC1 and AC2. Assignable controller settings are
made using Exclusive messages.
parameter will not be displayed when Variation Mode = Sys-
tem.
4
195