Yamaha QY700 Owner's Manual page 272

Job 14 Thin Out
• You use this job to remove repeated occurrences of a speci-
fied non-note event within the designated segment of a se-
lected user phrase. The purpose is to reduce the data vol-
ume and free up additional memory.
• Specifically, the job will remove every other occurrence of
the event in areas where the event recurs within 60 clock
cycles. The job will not remove an event that is separated
from the previous occurrence by at least 60 clock cycles.
1. Phrase
• The Phrase value selects the target phrase.
01,...,99
0101
1101
2. Segment
• The two boxes to the right of the M select the phrase area to
be thinned.
001:1,...,256:16
Measure: beat
0101
1101
3. Event
• The lower pair of boxes selects the targeted event type.
PB, CC (000,...,127, All), CAT, PAT
0101
1101
PB
CC(000,...,127,All)
CAT
PAT
Pitch bend
Control change (Any single control-
change message type 000 to 127, or
all control-change messages)
Channel aftertouch
Polyphonic aftertouch
Chapter 5. PATTERN MODE
7. Pattern Jobs
5
271