Yamaha CC-70W Owner's Manual page 37

RECORDING COMPACT DISCS
Receiver
CD Player
7
Tape Deck (KXW-S70)
5
Tape Deck (KX-S90)
EMPTY
1
1
6
6
A
TIME PROG
6
SEARCH
SKIP
DISC SKIP RANDOM REPEAT
2
PRESET
DOWN UP
PLAY STOP
REC/PAUSE
POWER SLEEP
7
1
1
4 3
4 5 3
TUNER DIRECT
2 3 4 5
6
2 3 4 5
7 8
7 8 9 0
B C D E
+
TAPE EDIT I0
STOP PLAY/PAUSE
1
CD
A/B/C/D/E
TUNER
PLAY
TAPE
DECK PHONO/AUX
A/B
DISPLAY VOLUME
- +
Automatic tape-editing
This convenient feature can be used to program tracks on a
disc (or discs) for recording to tape. By only memorizing the
tape's total possible recording time, the unit will automatically
program tracks or help you to program tracks so they will fit
onto the tape with the least amount of unrecorded space
remaining at each end of the tape.
To record a disc with the order of tracks
unchanged
1
Press the CD input selector button and load the disc to be
recorded.
2
Select the disc by pressing the DISC SKIP button.
3
Load a tape into the cassette compartment.
4
When recording with the Dolby NR system, set the Dolby
NR switch to B or C; if not, set it to OFF.
* For selection of the Dolby B or C position, refer to the
"Dolby B and C Type Noise Reduction" on page 28 or
30.
5
Set the reverse mode switch to
6
Press the TAPE button to select the length of the tape to
be used. Whenever pressed, C-46, C-54, C-60 and C-90
appear on the display in turn, and next it returns to the
normal display mode.
off C-46
When using tapes other than C-46, C-54, C-60 or C-90
When C-46, C-54, C-60 or C-90 is appearing on the
display, input the tape length by using the track number
input buttons on the remote control transmitter
(Examples)
C-62: Press "6" and then "2".
C-30: Press "3" and then "0", or press "+10" three times
and then "0".
7
Press the EDIT button. ("EDIT" appears on the display.)
The following internal operations are carried out before
recording is automatically started.
1)Tracks on the disc are automatically divided between
side A and side B. You can check the process by
watching the display.
2)The end part of the tape on which recording cannot be
done is wound.
3)This unit starts searching a peak level through all tracks
to be recorded. (While searching, "LEVEL" flashes on
the display.) When searching is finished, this unit
adjusts the recording level properly on the basis of this
data.
4)CD playback and recording starts. Recording is carried
out on both side A and B of the tape.
35
or .
C-54 C-60 C-90