Yamaha CC-75 Owner's Manual page 41

RECORDING COMPACT DISCS
Receiver
1
CD Player
7
Tape Deck
5
CD
1 2
1 2
6 7
6 7
6
A B
TIME PROG TAPE
REPEAT RANDOM STOP
MODE DISC SKIP
PLAY STOP
7
DECK
A/B REC/PAUSE
EFFECT LEVEL SP/PHONES MODE
- +
2
POWER SLEEP DISPLAY
1
4 3
3 4 5
3 4 5
6
8
8 9 0
C D E
EDIT +10
PLAY/PAUSE OPEN/CLOSE
1
TUNER
PLAY
TAPE
INPUT 1
DSS
VOLUME
+
-
Automatic tape-editing
This convenient feature can be used to program tracks on a
disc (or discs) for recording to tape. By only memorizing the
tape's total possible recording time, the unit will automatically
program tracks or help you to program tracks so they will fit
onto the tape with the least amount of unrecorded space
remaining at each end of the tape.
To record a disc with the order of tracks
unchanged
1
Select the CD position with the INPUT SELECTOR
control, watching the display, and load the disc to be
recorded.
2
Select the disc by pressing the DISC SKIP button.
3
Load a tape into the DECK B cassette compartment.
4
When recording with the Dolby NR system, set the Dolby
NR switch to B or C; if not, set it to OFF.
* For selection of the Dolby B or C position, refer to the
"Dolby B and C Type Noise Reduction" on page 29.
5
Set the reverse MODE switch to
6
Press the TAPE button on the remote control transmitter
to select the length of the tape to be used. Whenever
pressed, C-46, C-54, C-60 and C-90 appear on the
display in turn, and next it returns to the normal display
mode.
off C-46
When using tapes other than C-46, C-54, C-60 or C-90
When C-46, C-54, C-60 or C-90 is appearing on the
display, input the tape length by using the track number
input buttons on the remote control transmitter.
(Examples)
C-62: Press "6" and then "2".
C-30: Press "3" and then "0", or press "+10" three times
and then "0".
7
Press the EDIT button. ("EDIT" appears on the display.)
The following internal operations are carried out before
recording is automatically started.
* If the tape has not rewound to the end, it is rewound to
the end rapidly before recording starts.
1)Tracks on the disc are automatically divided between
side A and side B. You can check the process by
watching the display.
2)The end part of the tape on which recording cannot be
done is wound.
3)CD playback and recording starts. Recording is carried
out on both side A and B of the tape.
E-33
or .
C-54 C-60 C-90