Download Print this page

Frigidaire EFMIS155 User Manual page 9

Advertisement

Available languages

Available languages

Startup
Connect the power cord to a standard wall outlet. Do not use a GFCI outlet to connect the unit
(see page 4). After connection, you will immediately hear a short beep.
Temperature - Adjustable Thermostat Control
The default temperature is 43ºF. Use the
between the range of 40ºF - 61ºF.
The display will flash while the temperature is being set. After a few seconds, it will revert to its
current internal temperature reading The digital display reading will adjust as the unit cools.
While the unit is adjusting to the new setting, press the
temperature setting.
If there is a power outage, the unit will revert to the last temperature setting once power is restored.
Loading Beverages
When
loading the beverage center to full capacity, we recommend the following steps
to effectively cool a large number of beverages.
1. Use the Adjustable Thermostat Control to set the temperature to 43ºF (also the default
temperature).
2. Allow the beverage center to cool for a minimum of two hours.
3. Load the beverages. To achieve maximum capacity, refer to the loading diagrams.
4. After initially filling with beverages, the internal temperature will rise as indicated on the display.
5. Once the beverage center has cooled the beverages to 43ºF, use the Adjustable
Thermostat Control to select a desired cooler internal temperature (lowest temperature setting is 40ºF).
6. Allow several hours for the beverage center to cool to the desired lower temperature.
Note: It is normal for temperature variances to occur inside the unit, and areas near the door will
have slightly warmer temperatures.
Standard 12 Ounce Cans
The beverage center
accommodates 126 beverages
(standard 12 ounce cans).
To accommodate all 126
beverages, position the glass
shelves and load the
beverages as shown:
Bottles
The beverage center
accommodates a range of
bottles, and the capacity varies
depending on the position of
the shelves and width of the
bottles.
Nest the bottles to gain
greater capacity:
INSTALLATION
USING YOUR BEVERAGE CENTER
LOADING DIAGRAM
ROW 1
30 cans (Upright)
ROW 2
30 cans (Upright)
ROW 3
18 cans (Laying Down)
ROW 4
24 cans (Upright)
ROW 5
24 cans (Upright)
Other Beverages
The glass shelves can be adjusted to accommodate varying sizes
of beverage cans and bottles depending upon storage needs.
and
buttons to set the desired temperature
or
buttons to view the selected
-
7
-

Hide quick links:

Advertisement

loading