Advertisement
Enclosure number
6713
12. Remove the black protective plug from the antenna hole in the
enclosure.
13. Install the assembled surge protector into the hole (see below).
Figure 8: Install surge protector
14. Secure the surge protector to the enclosure with the provided
split washer and hex nut.
View of the installed surge protector from the inside of the enclosure
(see below). Enclosure 6413 shown.
8 | WI-FI ANTENNA KIT | 2106123MNAA
Antenna hole location
2 holes are on the bottom
of the enclosure in the
back left corner. There is
a 3rd hole of same size in
the Back Right Corner.
The Cable assembly is not
long enough to reach that
hole.
Photo of enclosure
Advertisement
