Appendix A. Specifications; Operation And Performance - GE PanaFlow XMT1000 User Manual

Appendix A. Specifications

A.1 Operation and Performance
Fluid Types
Acoustically conductive fluids, including most clean liquids, and many liquids with entrained solids or gas bubbles.
Maximum void fraction depends on transducer, interrogation carrier frequency, path length and pipe configuration.
Transducer Types
All liquid wetted transducers
Pipe Sizes
Standard: 1 in. to 76 in. (25 mm to 1930 mm)
Optional: >76 in. (1930 mm) consult factory
Data Logging
Storage standard on meter, up to 10,000 flow data points with up to 26 parameters per data point
(requires Vitality™ software)
Measurement Parameters
Volumetric Flow, Mass Flow, Flow Velocity and Totalized Flow
Flow Accuracy (Velocity)
Up to ±0.3% of reading (achievable when supplied with a complete flow meter system and process calibration).
Accuracy depends on pipe size, installation and number of measurement paths.
Note: The accuracy statement assumes measurement of a single phase homogeneous liquid with a fully developed
symmetrical flow profile passing through the meter. Applications with piping arrangements that create an
asymmetrical flow profile may require extended piping straight runs and/or flow conditioning for the meter to
perform to this specification.
Repeatability
±0.1% to 0.3% of reading
Range (Bidirectional)
–40 to 40 ft/s (–12.2 to 12.2 m/s)
Meter Turndown
400:1
Optional PC Software
Vitality™ PC software for added functionality
PanaFlow™ XMT1000 User's Manual
Appendix A. Specifications
31