Table of Contents
Advertisement
To Store the Settings
• Press “ ” or “ ” button on STORE option to store Picture
menu settings.
The stored picture mode setting will be valid only in current
program. However, the other stored values in Picture Menu
will be valid for all the programmes.
Feature Menu
• To enter the Feature menu directly, press the “YELLOW”
button, or
• Press “M” button, now you are in Main menu. In the Main
menu, select FEATURE using “ ” or “ ” button. Then en-
ter the Feature menu pressing “ ” or “ ” button.
Sleep Timer
As you enter the Feature menu, SLEEP TIMER will be the
first selected option. Use “ ” or “ ” button to change the
Sleep Timer values between OFF, 0:15:00, 0:30:00, 0:45:00,
1:00:00, 1:15:00, 1:30:00, 1:45:00 and 2:00:00.
It is displayed on the upper right of the screen. If sleep timer
is activated it is displayed with the TV status and erased with
it after 3 seconds.
If there is left only one minute of the down counting of the
timer, it is displayed automatically on the upper left of the
screen, and stayed there until finishing. Then TV goes auto-
matically to stand-by.
Child Lock
You can use this feature to prevent children turning on TV or
changing programs or adjustments etc. without remote control.
The CHILD LOCK feature can be set by “ ” or “ ” button to
either ON or OFF. When OFF is selected, there will be no
difference in the operation of your TV. When ON is selected,
the TV can only be controlled by the remote control handset.
In this case, the front panel buttons (except the Power On/
Off button) will not work.
Downloaded from:
http://www.usersmanualguide.com/
%5,*+71(66
&2175$67
&2/285
6+$531(66
02'(
6725(
2.
6281'
3,&785(
)($785(
,167$//
352*5$0
TG@@QÃUDH @S
PAA
8CDG9ÃGP8F
PAA
G6IB V6B@
@IB GDTC
TG@@QÃUDH @S
PAA
8CDG9ÃGP8F
PAA
G6IB V6B@
@IB GDTC
Selecting Menu Language
Menu language can be chosen by pressing “ ” or “ ” button
on LANGUAGE item.
TG@@QÃUDH @S
8CDG9ÃGP8F
G6IB V6B@
To Store Settings
In Feature menu all settings are stored automatically.
Installation Menu
• To enter the Installation menu directly, press the BLUE
button, or
• Press “M” button, now you are in Main menu. In the Main
menu, select “INSTALL.” using “ ” or “ ” button. Then en-
ter the Install menu pressing “ ” or “ ” button.
6281'
3,&785(
)($785(
,167$//
352*5$0
Selecting Programme
To select programme number, you can use “ ” or “ ” button,
Digit Buttons or The Double Digit button with digit buttons.
Selecting Band
BAND can be chosen as VHF1, VHF3 or UHF by “ ” or “ ”
button.
Selecting Frequency
The frequency value is,
• 044 - 890 MHz for band VHF1 - VHF3 - UHF.
QSP BS6H H@
76I 9
AS@R V@I8`
TU6I 96S9
T@6S 8C
ADI @ÃUVI DIB
TUPS @
FREQUENCY can be changed by “ ” or “ ” button, by the
Digit buttons or by the Double Digit button with digit buttons.
The decimal value in frequency can not be changed by the
digit buttons, it can be changed only by the “ ” or “ ” but-
ton. The value can be “00”, “25”, “50” and “75”. Also changing
Fine Tuning changes the decimal part.
Selecting Standard
Using “ ” or “ ” button on STANDARD, you can change the
standard to B/G, D/K, L/L’.
Selecting Search
To start the search process, press “ ” button for forward
search or “ ” button for backward search. SEARCH item
blinks during search process, since the process is stopped
or signal is found. During search process the semi-transpar-
- 10 -
PAA
PAA
@IB GDTC
&
WCA
'%!$
7B
Advertisement
Table of Contents
